How To Clean Silver Plated Brass Flute? (Correct answer)

After each playing session, thoroughly clean the interior of your flute to ensure that it is completely dry and free of moisture damage. Using nothing more than a silver polishing cloth to wipe off the exterior of your flute, polish the outside of your flute. Use silver polish or any other sort of polish on the outside of your flute to keep it looking its best.

How do you polish silver plated brass instruments?

To clean instruments with plated surfaces, start by using a glass cleaner to remove oil and dirt, along with those pesky fingerprints, off the surface. It is important to note that silver-plated finishes will tarnish over time. To keep them looking their best, use a silver polish cloth coated with a dry polish to polish them every now and again.

Can I use rubbing alcohol to clean my flute?

To clean your flute, soak a towel in “saliva” or rubbing alcohol and wipe it down. To keep your pads clean, avoid eating sweets or chewing gum before you play and never while you are participating. No one else should be allowed to play your instrument. The flute is a fragile instrument that has to be handled with care and attention.

You might be interested:  How Much Does A Good Flute Cost? (Correct answer)

Can I use silver polish on a flute?

You should never use silver polish or any other liquids to polish a flute when it’s in use. The use of liquid polish on your instrument is not suggested, despite the fact that it might cause harm to the instrument’s finger pads and rust the metal parts of your instrument.

How do you keep silver instruments from tarnishing?

Every time you use your instrument, follow a good cleaning practice to keep it from becoming tarnished. It’s best not to touch more of the instrument than is absolutely required when playing, and keep a cleaning cloth on available to wipe off the instrument after each usage.

How do you restore brass instruments?

Instructions for cleaning brass instruments are as follows:

  1. Dismantle the instrument in its entirety. Remove all of the valves from the instrument, as well as all of the slides and the bottoms of the valve caps. Simply spray Simple Green Pro HD RTU over the surface of the instrument and into any open spots. Then scrub the surface of the instrument with a soft brush.
  2. Rinse.
  3. Dry.
  4. Polish.
  5. Reassemble.

How do you clean a silver plated mouthpiece?


  1. In a sauce pan, combine the baking soda and warm tap water, carefully adding enough to thoroughly immerse the mouthpiece. Remove any patches, stick-ons, or whatever else you may have on your mouthpiece, and then using a paper towel, brush away any sticky that may have remained.

What household items can you use to clean a flute?

To summarize, anti-tarnish silver polish, rubbing alcohol, or hydrogen peroxide are the most effective cleaning agents for flutes in most cases. You may also use soap and water, but only in tiny amounts so as not to damage the pads or the cork in the headjoints themselves. While Windex isn’t strictly hazardous, it isn’t either suggested nor encouraged for use.

You might be interested:  Things To Look For When Buying A Flute? (Solution)

How do you make a flute shiny?

To see an easy step-by-step tutorial on how to make your flute shine, begin by cleaning the exterior of your flute using Windex. Following that, sanitize the mouthpiece with rubbing alcohol applied to a Q-tip or cotton ball. Keep the flute body glossy and tarnish-free by polishing it with silver polish.

How do you clean a flute with toothpaste?

Take a tooth brush and some toothpaste and clean the inside of your flute with them. Make care to clean it off with lukewarm water both before and after you use it. Unfortunately, I unintentionally soaked it in 3 percent hydrogen peroxide for an excessive amount of time, resulting in tarnish. The toothpaste, however, really assisted in cleaning it. Mouthwash is what I use to disinfect it.

Leave a Reply

Your email address will not be published. Required fields are marked *